This mobile phone model COLOR 8 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

Model COLOR 8

2.0 W/kg (over 10 g) SAR Limit

Head: 0.716W/Kg

Body: 0.681W/Kg (distance 0 mm)

This mobile phone model HERO 10 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

Model HERO 10

2.0 W/kg (over 10 g) SAR Limit

Head: 0.977W/Kg

Body: 0.675W/Kg (distance 5 mm)

This mobile phone model Tab 70 WiFi has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

Model Tab 70 WiFi

2.0 W/kg (over 10 g) SAR Limit

0.453W/Kg

This mobile phone model BV5300 Pro has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

Model BV5300 Pro

2.0 W/kg (over 10 g) SAR Limit

Head 0.824W/Kg

Body:0.932W/Kg (distance 5 mm)

4.0 W/kg (over 10 g) SAR Limit for Limbs

Limbs: 2.348W/Kg (distance 0 mm)

This mobile phone model A50 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

A50

2.0 W/kg (over 10 g) SAR Limit

Head: 0.399W/Kg

Body: 1.493W/Kg (distance 5 mm)

This mobile phone model A52 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

A52

2.0 W/kg (over 10 g) SAR Limit

Head: 0.234W/Kg

Body: 0.742W/Kg (distance 5mm)

This mobile phone model A52 Pro has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

A52 Pro

2.0 W/kg (over 10 g) SAR Limit

Head: 0.638W/Kg

Body: 0.983W/Kg (distance 5 mm)

This mobile phone model A53 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

A53

2.0 W/kg (over 10 g) SAR Limit

Head: 0.997W/Kg

Body: 0.990W/Kg (distance 5 mm)

This mobile phone model A53 Pro has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

A53 Pro

2.0 W/kg (over 10 g) SAR Limit

Head: 0.445W/Kg

Body: 0.700W/Kg (distance 5 mm)

This mobile phone model A55 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

A55

2.0 W/kg (over 10 g) SAR Limit

Head: 0.241W/Kg

Body: 0.886W/Kg (distance 5 mm)

This mobile phone model A55 Pro has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

A55 Pro

2.0 W/kg (over 10 g) SAR Limit

Head: 0.368W/Kg

Body: 0.675W/Kg (distance 5 mm)

This mobile phone model A60 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

A60

2.0 W/kg (over 10 g) SAR Limit

Head: 0.042W/Kg

Body: 0.081W/Kg (distance 5 mm)

This mobile phone model A60 Plus has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

A60 Plus

2.0 W/kg (over 10 g) SAR Limit

Head: 0.049W/Kg

Body: 0.390W/Kg (distance 5 mm)

This mobile phone model A60 Pro has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

A60 Pro

2.0 W/kg (over 10 g) SAR Limit

Head: 0.049W/Kg

Body: 0.930W/Kg (distance 5 mm)

This mobile phone model A70 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

A70

2.0 W/kg (over 10 g) SAR Limit

Head: 0.097W/Kg

Body: 0.800W/Kg (distance 5 mm)

This mobile phone model A70 Pro has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

A70 Pro

2.0 W/kg (over 10 g) SAR Limit

Head: 0.302W/Kg

Body: 1.078W/Kg (distance 5 mm)

This mobile phone model A80 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

A80

2.0 W/kg (over 10 g) SAR Limit

Head: 0.328W/Kg

Body: 0.564W/Kg (distance 5 mm)

This mobile phone model A80 Plus has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

A80 Plus

2.0 W/kg (over 10 g) SAR Limit

Head: 0.141W/Kg

Body: 0.531W/Kg (distance 5 mm)

This mobile phone model A80E has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

A80E

2.0 W/kg (over 10 g) SAR Limit

Head: 0.485W/Kg

Body: 0.502W/Kg (distance 5 mm)

This mobile phone model A80S has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

A80S

2.0 W/kg (over 10 g) SAR Limit

Head: 0.328W/Kg

Body: 0.564W/Kg (distance 5 mm)

This mobile phone model A90 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

A90

2.0 W/kg (over 10 g) SAR Limit

Head: 0.458W/Kg

Body: 0.940W/Kg (distance 5 mm)

This mobile phone model A95 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

A95

2.0 W/kg (over 10 g) SAR Limit

Head: 0.378W/Kg

Body: 0.633W/Kg (distance 5 mm)

This mobile phone model A96 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

A96

2.0 W/kg (over 10 g) SAR Limit

Head: 0.192W/Kg

Body: 0.591W/Kg (distance 5 mm)

This mobile phone model A100 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

A100

2.0 W/kg (over 10 g) SAR Limit

Head: 0.436W/Kg

Body: 0.888W/Kg (distance 5 mm)

This mobile phone model A200 Pro has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

A200 Pro

2.0 W/kg (over 10 g) SAR Limit

Head: 0.348W/Kg

Body: 0.594W/Kg (distance 0 mm)

This mobile phone model N2000 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

N2000

2.0 W/kg (over 10 g) SAR Limit

Head: 0.713W/Kg

Body: 0.536W/Kg (distance 0 mm)

This mobile phone model Shark 8 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

Shark 8

2.0 W/kg (over 10 g) SAR Limit

Head: 0.598W/Kg

Body: 0.976W/Kg (distance 5 mm)

This mobile phone model WAVE 6C has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

WAVE 6C

2.0 W/kg (over 10 g) SAR Limit

Head: 1.112W/Kg

Body: 0.680W/Kg (distance 5 mm)

This mobile phone model BL5000 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

BL5000

2.0 W/kg (over 10 g) SAR Limit

Head: 0.315W/Kg

Body: 0.707W/Kg (distance 5 mm)

This mobile phone model BL6000 Pro has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

BL6000 Pro

2.0 W/kg (over 10 g) SAR Limit

Head: 0.171W/Kg

Body: 0.975W/Kg (distance 5 mm)

This mobile phone model Active 6 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

Active 6

2.0 W/kg (over 10 g) SAR Limit

Body: 0.778W/Kg (distance 0 mm)

This mobile phone model BL8000 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

BL8000

2.0 W/kg (over 10 g) SAR Limit

Head: 0.524W/Kg

Body: 0.929W/Kg (distance 5 mm)

This mobile phone model Active 8 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

Active 8

2.0 W/kg (over 10 g) SAR Limit

Body: 0.924W/Kg (distance 0 mm)

This mobile phone model BL8800 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

BL8800

2.0 W/kg (over 10 g) SAR Limit

Head: 0.573W/Kg

Body: 0.995W/Kg (distance 5 mm)

This mobile phone model BL9000 Pro has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

BL9000 Pro

2.0 W/kg (over 10 g) SAR Limit

Head: 0.464W/Kg

Body: 0.719W/Kg (distance 5 mm)

This mobile phone model Active 8 pro has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

Active 8 pro

2.0 W/kg (over 10 g) SAR Limit

Body: 0.806W/Kg (distance 5 mm)

This mobile phone model BV4800 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

BV4800

2.0 W/kg (over 10 g) SAR Limit

Head: 0.246W/Kg

Body: 0.867W/Kg (distance 5 mm)

This mobile phone model MEGA 1 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

MEGA 1

2.0 W/kg (over 10 g) SAR Limit

Body: 0.955W/Kg (distance 5 mm)

This mobile phone model BV4900 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

BV4900

2.0 W/kg (over 10 g) SAR Limit

Head: 0.369W/Kg

Body: 0.920W/Kg (distance 5 mm)

This mobile phone model BV4900 Pro has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

BV4900 Pro

2.0 W/kg (over 10 g) SAR Limit

Head: 0.381W/Kg

Body: 1.229W/Kg (distance 5 mm)

This mobile phone model Tab 5 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

Tab 5

2.0 W/kg (over 10 g) SAR Limit

Body: 0.466W/Kg (distance 0 mm)

This mobile phone model BV4900S has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

BV4900S

2.0 W/kg (over 10 g) SAR Limit

Head: 0.418W/Kg

Body: 1.452W/Kg (distance 5 mm)

This mobile phone model BV5100 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

BV5100

2.0 W/kg (over 10 g) SAR Limit

Head: 0.261W/Kg

Body: 0.589W/Kg (distance 5 mm)

This mobile phone model BV5100 Pro has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

BV5100 Pro

2.0 W/kg (over 10 g) SAR Limit

Head: 0.261W/Kg

Body: 0.589W/Kg (distance 5 mm)

This mobile phone model BV5200 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

BV5200

2.0 W/kg (over 10 g) SAR Limit

Head: 0.474W/Kg

Body: 1.208W/Kg (distance 5 mm)

This mobile phone model BV5200 Pro has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

BV5200 Pro

2.0 W/kg (over 10 g) SAR Limit

Head: 0.475W/Kg

Body:1.162W/Kg (distance 5 mm)

This mobile phone model BV5300 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

BV5300

2.0 W/kg (over 10 g) SAR Limit

Head:0.190W/Kg

Body: 0.749W/Kg (distance 5 mm)

This mobile phone model Tab 6 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

Tab 6

2.0 W/kg (over 10 g) SAR Limit

Head: 0.591W/Kg

Body: 1.269W/Kg (distance 0 mm)

This mobile phone model BV5300 Plus has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

BV5300 Plus

2.0 W/kg (over 10 g) SAR Limit

Head:0.189W/Kg

Body:0.580W/Kg (distance 5 mm)

This mobile phone model BV5500 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

BV5500

2.0 W/kg (over 10 g) SAR Limit

Head: 0.052W/Kg

Body: 0.228W/Kg (distance 5 mm)

This mobile phone model Tab 7 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

Tab 7

2.0 W/kg (over 10 g) SAR Limit

Body: 1.787W/Kg (distance 0 mm)

This mobile phone model BV5500 Plus has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

BV5500 Plus

2.0 W/kg (over 10 g) SAR Limit

Head:0.147W/Kg

Body:0.496W/Kg (distance 5 mm)

This mobile phone model Tab 7 Wifi has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

Tab 7 Wifi

2.0 W/kg (over 10 g) SAR Limit

Body: 0.102W/Kg (distance 0 mm)

This mobile phone model BV5900 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

BV5900

2.0 W/kg (over 10 g) SAR Limit

Head: 0.166W/Kg

Body:0.866W/Kg (distance 5 mm)

This mobile phone model BV6200 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

BV6200

2.0 W/kg (over 10 g) SAR Limit

Head: 0.251W/Kg

Body:1.092W/Kg (distance 5 mm)

This mobile phone model Tab 8 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

Tab 8

2.0 W/kg (over 10 g) SAR Limit

Body: 1.328W/Kg (distance 0 mm)

This mobile phone model BV6200 Pro has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

BV6200 Pro

2.0 W/kg (over 10 g) SAR Limit

Head:0.287W/Kg

Body:0.914W/Kg (distance 5 mm)

This mobile phone model BV6300 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

BV6300

2.0 W/kg (over 10 g) SAR Limit

Head:0.475W/Kg

Body:0.935W/Kg (distance 5 mm)

This mobile phone model BV6300 Pro has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

BV6300 Pro

2.0 W/kg (over 10 g) SAR Limit

Head:0.411W/Kg

Body:0.865W/Kg (distance 5 mm)

This mobile phone model Tab 8 Wifi has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

Tab 8 Wifi

2.0 W/kg (over 10 g) SAR Limit

Body: 0.918W/Kg (distance 5 mm)

This mobile phone model BV6600 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

BV6600

2.0 W/kg (over 10 g) SAR Limit

Head:0.242W/Kg

Body:0.607W/Kg (distance 5 mm)

This mobile phone model Tab 9 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

Tab 9

2.0 W/kg (over 10 g) SAR Limit

Body: 1.058W/Kg (distance 0 mm)

This mobile phone model BV6600 Pro has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

BV6600 Pro

2.0 W/kg (over 10 g) SAR Limit

Head:0.249W/Kg

Body:0.964W/Kg (distance 5 mm)

This mobile phone model BV6600E has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

BV6600E

2.0 W/kg (over 10 g) SAR Limit

Head:0.366W/Kg

Body:0.779W/Kg (distance 5 mm)

This mobile phone model BV7100 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

BV7100

2.0 W/kg (over 10 g) SAR Limit

Head:0.458W/Kg

Body:0.911W/Kg (distance 5mm)

This mobile phone model Tab 9 Wifi has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

Tab 9 Wifi

2.0 W/kg (over 10 g) SAR Limit

Body: 1.195W/Kg (distance 0 mm)

This mobile phone model BV7200 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

BV7200

2.0 W/kg (over 10 g) SAR Limit

Head:0.686W/Kg

Body:1.305W/Kg (distance 5 mm)

This mobile phone model BV8100 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

BV8100

2.0 W/kg (over 10 g) SAR Limit

Head:0.168W/Kg

Body:1.584W/Kg (distance 5 mm)

This mobile phone model BV8800 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

BV8800

2.0 W/kg (over 10 g) SAR Limit

Head:0.350W/Kg

Body:1.100W/Kg (distance 5 mm)

This mobile phone model BV8900 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

BV8900

2.0 W/kg (over 10 g) SAR Limit

Head:0.428W/Kg

Body:0.933W/Kg (distance 5 mm)

This mobile phone model BV9100 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

BV9100

2.0 W/kg (over 10 g) SAR Limit

Head:0.133W/Kg

Body:0.473W/Kg (distance 5 mm)

This mobile phone model BV9200 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

BV9200

2.0 W/kg (over 10 g) SAR Limit

Head: 0.310W/Kg

Body:0.930W/Kg (distance 5 mm)

This mobile phone model BV9300 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

BV9300

2.0 W/kg (over 10 g) SAR Limit

Head:0.323W/Kg

Body:0.564W/Kg (distance 5 mm)

This mobile phone model BV9300 Pro has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

BV9300 Pro

2.0 W/kg (over 10 g) SAR Limit

Head:0.221W/Kg

Body:0.841W/Kg (distance 5 mm)

This mobile phone model BV9600E has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

BV9600E

2.0 W/kg (over 10 g) SAR Limit

Head:0.236W/Kg

Body:1.549W/Kg (distance 5 mm)

This mobile phone model BV9700 Pro has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

BV9700 Pro

2.0 W/kg (over 10 g) SAR Limit

Head:0.164W/Kg

Body:0.290W/Kg (distance 5 mm)

This mobile phone model BV9800 Pro has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

BV9800 Pro

2.0 W/kg (over 10 g) SAR Limit

Head:0.309W/Kg

Body:0.991W/Kg (distance 5 mm)

This mobile phone model BV9900 Pro has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

BV9900 Pro

2.0 W/kg (over 10 g) SAR Limit

Head:0.186W/Kg

Body:1.224W/Kg (distance 5 mm)

This mobile phone model Tab 10 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

Tab 10

2.0 W/kg (over 10 g) SAR Limit

Body: 1.425W/Kg (distance 0 mm)

This mobile phone model BV9900E has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

BV9900E

2.0 W/kg (over 10 g) SAR Limit

Head:0.186W/Kg

Body:1.224W/Kg (distance 5 mm)

This mobile phone model Tab 10 Pro has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

Tab 10 Pro

2.0 W/kg (over 10 g) SAR Limit

Body: 1.135W/Kg (distance 0 mm)

This mobile phone model N1000 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

N1000

2.0 W/kg (over 10 g) SAR Limit

Head:0.233W/Kg

Body:0.407W/Kg (distance 5 mm)

This mobile phone model Tab 10 Wifi has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

Tab 10 Wifi

2.0 W/kg (over 10 g) SAR Limit

Body: 0.094W/Kg (distance 5 mm)

This mobile phone model N6000 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

N6000

2.0 W/kg (over 10 g) SAR Limit

Head:0.664W/Kg

Body:1.229W/Kg (distance 5 mm)

This mobile phone model N6000 SE has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

N6000 SE

2.0 W/kg (over 10 g) SAR Limit

Head:0.441W/Kg

Body:0.975W/Kg (distance 5 mm)

This mobile phone model Tab 11 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

Tab 11

2.0 W/kg (over 10 g) SAR Limit

Body: 0.779W/Kg (distance 0 mm)

This mobile phone model Tab 11 Wifi has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

Tab 11 Wifi

2.0 W/kg (over 10 g) SAR Limit

Body: 0.434W/Kg (distance 0 mm)

This mobile phone model Tab 12 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

Tab 12

2.0 W/kg (over 10 g) SAR Limit

Body: 1.409W/Kg (distance 0 mm)

This mobile phone model Tab 12 Pro has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

Tab 12 Pro

2.0 W/kg (over 10 g) SAR Limit

Body: 0.797W/Kg (distance 5 mm)

This mobile phone model Tab 13 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

Tab 13

2.0 W/kg (over 10 g) SAR Limit

Body: 1.515W/Kg (distance 0 mm)

This mobile phone model Tab 13 Pro has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

Tab 13 Pro

2.0 W/kg (over 10 g) SAR Limit

Body: 0.991W/Kg (distance 5 mm)

This mobile phone model Tab 15 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

Tab 15

2.0 W/kg (over 10 g) SAR Limit

Body: 1.507W/Kg (distance 0 mm)

This mobile phone model Tab 15 Pro has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

Tab 15 Pro

2.0 W/kg (over 10 g) SAR Limit

Body: 0.999W/Kg (distance 5 mm)

This mobile phone model Tab 16 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

Tab 16

2.0 W/kg (over 10 g) SAR Limit

Body: 0.918W/Kg (distance 5 mm)

This mobile phone model Tab 16 Pro has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

Tab 16 Pro

2.0 W/kg (over 10 g) SAR Limit

Body: 0.964W/Kg (distance 5 mm)

This mobile phone model Tab 50 Wifi has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

Tab 50 Wifi

2.0 W/kg (over 10 g) SAR Limit

Body: 0.368W/Kg (distance 0 mm)

This mobile phone model Tab 60 WiFi has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

Tab 60 WiFi

2.0 W/kg (over 10 g) SAR Limit

Body: 0.347W/Kg (distance 0 mm)

This mobile phone model Tab 60 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

Tab 60

2.0 W/kg (over 10 g) SAR Limit

Body: 0.890W/Kg (distance 5 mm)

This mobile phone model Tab 80 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

Tab 80

2.0 W/kg (over 10 g) SAR Limit

Body: 0.991W/Kg (distance 5 mm)

This mobile phone model Tab 90 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

Tab 90

2.0 W/kg (over 10 g) SAR Limit

Body: 1.008W/Kg (distance 0 mm)

This mobile phone model Tab A5 Kids has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

Tab A5 Kids

2.0 W/kg (over 10 g) SAR Limit

Body: 0.794W/Kg (distance 0 mm)

This mobile phone model Tab3 kids has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

Tab3 kids

2.0 W/kg (over 10 g) SAR Limit

Body: 0.113W/Kg (distance 5 mm)

This mobile phone model Tab 18 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

Tab 18

2.0 W/kg (over 10 g) SAR Limit

Body: 0.693W/Kg (distance 0 mm)

This mobile phone model Tab 30 WIFI has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

Tab 30 WIFI

2.0 W/kg (over 10 g) SAR Limit

Body: 0.411W/Kg (distance 5 mm)

This mobile phone model BV4800 Pro has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

BV4800 Pro

2.0 W/kg (over 10 g) SAR Limit

Head: 0.682W/Kg

Body: 0.874W/Kg (distance 5 mm)

This mobile phone model BV7300 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

BV7300

2.0 W/kg (over 10 g) SAR Limit

Head:0.246W/Kg

Body:1.042W/Kg (distance 5 mm)

This mobile phone model BV8200 has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

BV8200

2.0 W/kg (over 10 g) SAR Limit

Head: 0.628W/Kg

Body: 0.577W/Kg (distance 0 mm)

This mobile phone model BV6200 Plus has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

BV6200 Plus

2.0 W/kg (over 10 g) SAR Limit

Head: 0.277W/Kg

Body: 0.700W/Kg (distance 5 mm)

This mobile phone model BV4800 SE has been designed to comply with applicable safety requirements for exposure of radio waves.

The radio wave exposure guidelines employ a measurement known as the Specific Absorption Rate (SAR) which refers to the rate at which the body absorbs RF energy. SAR value as the basic restrictions is specified in Council Recommendation 1999/519/EC, which is 2W/kg in countries that set the limit averaged over 10 gram of tissue; and in the IEEE Std C95.1-2005, which is 1.6 W/kg in counties that set the limit averaged over 1 gram of tissue.

During SAR testing, this device was set to transmit at its highest certified power levels in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation not exceeding 25 mm.

To make sure the mobile phone working on a lower RF exposure status, use a hands-free option, such as Bluetooth headphone, supplied headphones, or other similar accessory. Use of other accessories which contain metal parts may not ensure compliance with RF exposure guidelines.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The highest SAR values are as follows:

BV4800 SE

2.0 W/kg (over 10 g) SAR Limit

Head: 0.431W/Kg

Body: 1.203W/Kg (distance 5 mm)

4.0 W/kg (over 10 g) SAR Limit for Limbs

Limbs: 2.156W/Kg (distance 0 mm)